2PCS DXF battery 3S Lipo 11.1V 11.4V 5200mah 6200mah 7200mah 8000mah 9200mah 6750mah 80C 100C 130C with EC5 XT90 T for RC Car

About DXF:

DXF is one battery brand of Shenzhen SKT Technology Co., LtdCompany founded in 2016, is a leading manufacturer of RC LiPo Battery based on Shenzhen China. DXF Batteries offer an excellent value by providing factory direct pricing and quality that meets or exceeds that of other major battery manufacturers. All of DXF batteries comply with RoHS and CE quality testing standards.DXF only  use Grade A cell.  DXF which is the Fans hobbyking town.

Key Point:

- Stable automatic stacking technology enables single-cell capacities .

- Higher capacity during heavy discharge. More than 90% at 100% C rate.

- Fast charge capable, up to 5C on some batteries.

- Longer Cycle Life, almost double that of standard lipoly technology.

- Friendly after-sales support and after-sales guarantee.

Parameter Description:

11.1V 5200mah 60C lipo HardCase size: 138*47*36mm weight 395g.

11.1V 5200mah 80C lipo HardCase size: 138*47*36mm weight 395g.

11.1V 6750mah 110C lipo HardCase size: 138*47*36mm weight 415g.

DXF 11.1V 6200MAH 80C XT90/EC5 138*48*36MM 421G

DXF 11.1V 7200MAH 80C XT90/EC5 138*48*36MM 425G

DXF 11.4V 8000MAH 130C XT90/EC5 138*48*36MM 435G

DXF 11.4V 9200MAH 130C XT90/EC5 138*48*36MM 493G

11.1V 5200mah 100C lipo HardCase size: 138*47*36mm weight 385g.

Package Information:

2PCS DXF 11.1V 5200MAH 60C T

2PCS DXF 11.1V 5200MAH 80C EC5/T

2PCS DXF 11.1V 6200MAH 80C XT90/EC5

2PCS DXF 11.1V 6750MAH 100C T

2PCS DXF 11.1V 7200MAH 80C XT90/EC5

2PCS DXF 11.4V 8000MAH 130C XT90/EC5

2PCS DXF 11.4V 9200MAH 130C XT90/EC5

2PCS DXF 11.1V 5200MAH 100C EC5

Warm Reminder:

1. Before using it, please full charge it with specific lipo balance charger;

2. Charge lipo battery no more than 4.20V per cell. As for battery pack in series, Please choose balance charging mode or charge each cell respectively;

3. Charging temperature must range in 15-35 Celsius, reverse charging is prohibited;

4. The voltage difference between any two cells should be in 0.03V, or charge is advised to balance the voltages beforeusage;

5. Please make sure the cut-off voltage is not lower than 3.4V, we highly recommend not lower than 3.6V;

6. Never discharge battery with current over the designed maximum continuous discharging current. After over current discharge, the performance will be deteriorated and cycle life will be shortened, causing overheating and even welling ,breakage, internal short-circuited etc;

7. If the surface temperature exceeds 65 Celsius while functioning, the battery should be suspended using until it cool down to ambient temperature naturally. Higher temperature may result int battery swelling and performance;

8. Do regularly charge discharge for maintenance(about 1-3 times every 3 months),battery must stored at about 3.85v/cell;

9. Do store battery at a place with low-humidity and free from corrosive gas within the temperature ranged from -20 Celsius to +40 Celsius

10. Under any circumstances dis-assembly of battery is prohibited.